Design And Implementation Of Remote Monitoring System Based On Gsm Pdf


By Eric W.
In and pdf
21.01.2021 at 20:05
8 min read
design and implementation of remote monitoring system based on gsm pdf

File Name: design and implementation of remote monitoring system based on gsm .zip
Size: 19679Kb
Published: 21.01.2021

Taking into account the safety of itself and high reliability and high availability features, we need to do to design more complete security monitoring system, which combines detection equipment, actuators and monitored objects together to form a whole, including the network directly to the monitored object inspection, monitoring and control process.

This research describes a complete fuel-level monitoring system. The research started with the design and construction of a fuel-level sensor and then was followed by configuration of a remote Aplicom 12 GSM module in order to interface the connected sensor. After the module configuration, monitoring of remote fuel is possible by sending control messages from a compatible mobile phone in order to query the status of the remote fuel sensor and hence the volume of fuel in the tank. The status message from the module will be sent back via a Global System for Mobile Communications GSM network to the mobile phone that sent the query or control message. Equipment, such as cars, motorcycles, trucks, generators, and compressors, which is powered by internal combustion engine needs a means of refueling so that it can run for as long and efficiently as possible.

The Research on Monitoring System Design and Implementation for the Network Security

Use of this Web site signifies your agreement to the terms and conditions. Special Issues. Contact Us. Change code. American Journal of Electrical and Computer Engineering. Transformer is one of the most vital components of power transmission and distribution infrastructure. In a developing country such as Nigeria, majority of the growing population of the people are still grappling with gross inadequate and epileptic power supply.

Only about MW of electricity is available for distribution by load shedding due to decay in existing infrastructure. The aim of this work is to apply modern technology to prevent further decay of the equipments particularly the transformer which is very expensive. This article involves the design and implementation of a device to monitor and detect the operating condition of a transformer with emphasis on power distribution transformers.

A module embedded Global System for Mobile communication GSM enabled device is designed to monitor load currents and temperature, using a micro-controller and sensor. The monitored values are processed and recorded in the system memory which is programmed with some predefined instructions to detect any abnormal working condition of the transformer so that the GSM module can send a Small Message Signal SMS to designated mobile telephones containing information about the fault, base on the programmed instructions into the micro-controller.

This will help the power distribution company respond swiftly to abnormalities that may lead to catastrophic failures and subsequent system short down. It is a fully automated device capable of reducing the risk of transportation and human errors associated with manual transformer inspection and testing. The device was tested and it responded very well to fulfill the set objectives. Vol 5, Issue 1. Sharma A. Liu, H.

Chen, M. Wang, and S. Networks Appl. Zulkifli, F. Che Harun, and N. Ling, L. Wong, J. Tan, and C. Sarath Kumar, Uvaraj M. Kabilesh Kumar C. V and Kalaiselvi, A. Vol 5 Issue Sarsamba, M. The load monitoring and protection on electricity power lines using GSM network. Nikhil, P. Y and Trupti Tagare Vol 4 Issue5. Patil, V. A, Namrata S. Kumbhar and Shital S. Patil Suresh, D. Jenifer, A. Bharathi, B. R and Shanthi Mounika, B. International Journal of Engineering Techniques.

Vol 4, Issue 1. Pandey, R. Agarwal, M. Pepper, F. Steven Engineering Publication. Verle M. Mikro Elektronika Publication. Mikro Elektronika Publication, Murugan and R. Mehta, P. Kundu, A. Chowdhury, and V. Dashti and M. Power Deliv. Join as an Editor-in-Chief. Open Access. Download Certificates. Recommend to Library. Tel:

We apologize for the inconvenience...

Use of this Web site signifies your agreement to the terms and conditions. Special Issues. Contact Us. Change code. American Journal of Electrical and Computer Engineering.

Skip to search form Skip to main content You are currently offline. Some features of the site may not work correctly. DOI: At present cost-saving technology, labor-saving are the addressing key issues in irrigation. This paper gives a review of these systems based on existing technologies and also proposes an economical and generic automatic irrigation system based on wireless sensors with GSM-Bluetooth for irrigation system controller and remote monitoring system. View PDF. Save to Library.

Design of Remote Monitoring and Control System with Automatic Irrigation System using GSM-Bluetooth

The aim of this research is to design and implement a prototype of a home energy management system based on SMS service on GSM network. The proposed system can remotely monitor and control the home appliances using a mobile phone. The proposed system consists of a microcontroller connecting home appliances and lighting through sensors and relays. This system is implemented using a GSM module that is connected with the personal computer representing the designed microcontroller.

Skip to Main Content. A not-for-profit organization, IEEE is the world's largest technical professional organization dedicated to advancing technology for the benefit of humanity. Use of this web site signifies your agreement to the terms and conditions. Based on the total design of the system, the hardware and software of the system is designed. In this system, GSM network is a medium for transmitting the remote signal.

Design of GSM Based Auto-responder for Educational Institute

GSM-Bluetooth based Remote Monitoring and Control System with Automatic Light Controller

The system measures ECG using infrared sensor and the temperatures at oral and wrist of the patient using temperature sensors. Microcontroller, receives the data from the sensors, displays the same and communicates to the web server automatically. The existing system has no alert signal, during abnormal condition to the surrounding and to the doctor. The proposed system consists of a visualization module of the server program, which graphically displays the recorded biomedical signals on android mobile devices used by doctors at the receiver end.

To browse Academia. Skip to main content. By using our site, you agree to our collection of information through the use of cookies. To learn more, view our Privacy Policy. Log In Sign Up. Download Free PDF. Akhil Shukla.

Metrics details. This research describes a complete fuel-level monitoring system. The research started with the design and construction of a fuel-level sensor and then was followed by configuration of a remote Aplicom 12 GSM module in order to interface the connected sensor. After the module configuration, monitoring of remote fuel is possible by sending control messages from a compatible mobile phone in order to query the status of the remote fuel sensor and hence the volume of fuel in the tank.

Shariff, F, , Rahim, N. Kopacz Cs. Iskandar Dadang, Santosa P. Li Wang, Kuo-Hua Liu.

This paper presents design and implementation of an auto-responder for educational institute. The application provides a good example of the use of Information and Communication Technology ICT and illustrates how low cost off-the-shelf technologies like GSM can be meaningfully used for remote data access. Unable to display preview. Download preview PDF. Skip to main content.

GSM-Bluetooth based Remote Monitoring and Control System with Automatic Light Controller

0 Comments

Leave a Reply